Welcome to BIOSTRIP

Call Us :01728 745200
Total:£0.00

How to use Biostrip 20

For a quicker strip - scuff the paint surface

Use wire wool to remove softened paint in awkward corners and profiles

Some customers have said that covering the treated area with clingfilm reduces the strip time

Ensure that the area to be stripped is clean and free of grease.

Brush a generous layer of Biostrip 20 on to the surface. Allow the paint to blister or soften (depending upon the paint type). This should take between 30 and 60 minutes but will vary depending upon ambient temperature, paint type, thickness and number of layers.

Do not allow Biostrip to dry out, apply more product if this starts to happen.

Remove softened/ blistered paint by either rinsing , scraping or power washing with water.

Clean the area thoroughly with a mild soap solution, then finally rinse with clean water